Fast Rolling Door Air Shower Introduction
Fast rolling door air shower is based on the ordinary air shower to change the door system, using PVC material to make up the door that can roll up and down. Fast rolling door air shower can be used in many scenarios, such as food, medicine, health care products, materials, chemistry, electronics, printing, assembly, precision machinery workshop and logistics, warehousing, air shower room, cargo shower room, welding room, etc. It can meet the needs of frequent logistics and clean places, and has the advantages of saving energy, increasing air conditioning effect, fast automatic shutdown, improving operation efficiency and creating a comfortable working environment.
Fast Rolling Door Air Shower Design Drawings
1.fast shutter motor 2.air shower control board 3.SUS Nozzle 4.infrared sensor
5A/B: sensor for door open 6.PVC rolling door 7.big air volume motor 8.HEPA air filter
9.Pre-filter 10A/B: sensor for door close 11.purification light
Fast Rolling Door Air Shower Control system
Enter the clean room:
When sensor 5A senses person or cargo, the entrance door opens automatically.
Persons or goods enter the sensing area of sensor 4
When sensor 4 senses person or cargo, and sensor 10 and sensor 5A do not sense person or cargo, the entrance door closes.
After the two doors are closed, the air shower starts and begins to blow. The time is set to 15 s. Users can adjust the time according to their needs.
When the blow stops, the exit door opens.
When sensor 4, sensor 10B and sensor 5B senses no one or cargo, the exit door closes.
Get out of the clean room:
When person or cargo station is in the sensing area of sensor 5B, the exit door opens.
Persons or goods enter sensor 4 sensing area
When the sensor 4 senses someone or goods, while the sensor 5B and 10B do not, the exit door closes.
Both doors will be closed, and after three seconds, the entrance door opens. When the inductor 4, 5A and 10A cannot sense people or goods, the entrance door closes.
Fast Rolling Door Air Shower Parameter
|HA-AS1300T Air shower Tunnel|
|External size(mm) (WXDXH)||1150x1030x2180mm||1150×2030×2180mm|
|Persons per cycle||1-2 person||2-4 person|
|Air shower Duration||Factory set at 12 second (adjustable)|
|Material||1: Entirety Sus304.(T=1.0/1.2mm)|
|2:External is steel with power coated,|
|Internal is SUS304.(T=1.0/1.2mm)|
|3: External is steel with power coated.|
|Internal is SUS201. (T=1.0/1.2mm)|
|Fan consumption||0.75KWX1 set||0.75KW×2 set|
|Air flow of fan(m3/h)||1300m3/h|
|Fan run (r/min)||2800r/min|
|Nozzle in stain less steel||12pcs||24pcs|
|Wind speed(m/s)||> 22-27m/s|
|LED Fluorescent Lamp||20wx1||20w×2|
|HEPA Filter||Air velocity||1000(m3/h)|
|Efficiency||75% @ 5um|
|Electrical||Power supply||380v/50Hz OR 380v/60Hz|
|Customer’s design is available|