- Description
- HEPA Filter Operation Conditions
- Specification
- Inquiry
H13-H14 HEPA Deep Pleated Filter Introduction:
The HEPA Deep Pleated Filter normally used for final filtration applications in clean rooms, computer suites, asbsestos removal areas, hospital
operating theatres and any site requiring ultra clean conditions.
HEPA Deep Pleated Filter Construction:
The filter media is a water repellent pleated micro-glass fiber paper, each pleat is separated either by a kraft
paper or aluminium separator.
The completed pleat pack is then bonded into a frame which may be of high density particle board, galvanised
mild steel, stainless steel or aluminium. Neoprene gaskets may be fitted to either or both filter faces.
By extending the surface area it is possible to increase the flow rate for a given size of filter.
Approximately twice the flow rate may be achieved through the same size of HEPA filter by extending the surface area – this
is accompanied by a slight increase is pressure drop.Face grilles are available as an option.
| Type | Absolute Deep Pleats HEPA Filter | ||
| Brand | Haoairtech | ||
| Efficiency | H13-H14 | ||
| Frame | AL/GL /MDF Frame | ||
| Sealant | AB GLUE | ||
| Spacer | Hot Melt Glue | ||
| Gasket | EPDM or EVA | ||
| Standard | EN1822 | ||
| Max Temperture | 80℃ | ||
| Max. Humidity | 100% | ||
| Frame thickness | 120-292mm | ||
| Original Place | China |
Customer Size is Available.
| Nominal Size
(W*H*D) |
Size (mm)(W*H*D) | Pleasts Type | Flange | Air Flow
(m3/h) |
Face Velocity | Primary Resistance (pa) |
Finally Resistance (Pa) |
| 12*12*6 | 305x305x150 | Deep Pleats AL Foile |
Two side | 360 | 1.3 | F6: 90Pa F7:130Pa F8:140pa F9:150Pa |
300Pa |
| 12*24*6 | 305x610x150 | Two side | 720 | 1.3 | |||
| 24*24*6 | 610x610x150 | Two side | 1680 | 1.3 | |||
| 30*24*6 | 762x610x292 | Two side | 2160 | 1.3 | |||
| 12*12*12 | 305x305x292 | Two side | 600 | 2.5 | |||
| 12*24*12 | 305x610x292 | Two side | 1320 | 2.5 | |||
| 24*24*12 | 610x610x292 | Two side | 3000 | 2.5 | |||
| 30*24*12 | 762x610x292 | Two side | 3600 | 2.5 |
| Size | Rate air flow | Initial Resistance | Final Resistnace | Media Area | Dust Holding Capacity | Filter efficiency |
| 484x484x120 | 390 | 200 | 400-600 | 4.4 | 230 | H13 |
| 610x610x120 | 620 | 200 | 400-600 | 7.1 | 370 | H13 |
| 610x915x120 | 930 | 200 | 400-600 | 10.6 | 560 | H13 |
| 610x1220x120 | 1500 | 200 | 400-600 | 14.1 | 740 | H13 |
| 484x484x150 | 530 | 200 | 400-600 | 6 | 320 | H13 |
| 610x610x150 | 1000 | 200 | 400-600 | 9.7 | 510 | H13 |
| 610x915x150 | 1500 | 200 | 400-600 | 14.5 | 770 | H13 |
| 610x1220x150 | 2000 | 200 | 400-600 | 19.3 | 1020 | H13 |
| 484x484x220 | 1000 | 200 | 400-600 | 9.8 | 600 | H13 |
| 610x610x220 | 1600 | 200 | 400-600 | 15.8 | 920 | H13 |
| 610x915x220 | 2300 | 200 | 400-600 | 23.7 | 1340 | H13 |
| 610x1220x220 | 3000 | 200 | 400-600 | 31.6 | 1750 | H13 |
Related Products
-
Read MoreQuick ViewAir Handler Activated Honeycomb Carbon Filter For Purification
It has wide applications in many fields, such as chemical industry, light industry, pharmaceutical industry, environmental protection, food industry and military industry.
Read MoreQuick View -
Read MoreQuick ViewIndustrial 300℃ High Temperature PreFilter G3-G4
Frame uses galvanized steel sheet or aluminum while media uses long fiber glass and fixed by aluminum mesh to avoid deformation
With high resistance to chemicals, this filter can filter particles like tar, soot and dust, produced in high temperature roast to prevent damage to surface painting quality.Read MoreQuick View -
Read MoreQuick ViewCompact V-Cell Air Filter For Air Conditioning
V-Cell Filters are engineered to protect both expensive HVAC equipment and workers from dirty air and its damaging effects. The user friendly filter is also lightweight, durable and easy to install.
Read MoreQuick View -
Read MoreQuick ViewClean Room V-Bank Compact HEPA Filter For Industrial
Compact HEPA Air Filters are engineered to protect both expensive HVAC equipment and workers from dirty air and its damaging effects. The user-friendly filter is also lightweight, durable and easy to install.
Read MoreQuick View -
Read MoreQuick ViewAir Filtration 350℃ High-temp Air Filter For Industrial
350℃ high temperature air filters made of stainless steel for demanding conditions.
These durable filters can be operated at extremely high velocities with minimum pressure drop.Read MoreQuick View -
Read MoreQuick ViewDust Collector Filters Glass Fiber Bag Filters For HVAC Facilities
The Glass Fiber Bag Filter is completely constructed of non-corrosive materials.
The bag is sewn with a constant media spacing stitch for uniform dust loading and reduced pressure drop.
This maximizes the filter’s life. There are no maintenance requirements between changes.
Along with low maintenance costs, single-body construction allows for easy handling and installation.Read MoreQuick View -
Read MoreQuick ViewH13-H14 HEPA Replacement Air Filter For Clean Room
The Cassette (HEPA) filter offers an economical method of installing a HEPA Filter into a Cleanroom, offering an alternative to the HEPA Terminal Housing.The Cassette HEPA Filter can also be used to create a Laminar Flow Cabinet or a specific application with the minimum of engineering.
Read MoreQuick View -
Read MoreQuick ViewGranular Activated Carbon Filter Cartridge For Industrial Purification
Carbon Cartridge Filters are installed in air handling units (AHU’s) or air ducts.
They can be used in air conditioning and ventilation systems for the deodorisation and purification of the air.Read MoreQuick View -
Read MoreQuick ViewHigh Performance Back Side Fluid Seal HEPA Filter For Industrial
The gel seal HEPA filters are mainly used for pharmaceutical industries.
The fluid gel can help provide better seal to prevent air leakages.
Normal HEPA filters the gasket is EVA neoprene around the frame. As the fluid gel is semisolid with good fluidity, the gel can create enough shape modification to install the slot between frame with the filter holder.Read MoreQuick View -
Read MoreQuick ViewHigh Performance Knife-Egde Frame Filter For Cleanroom
Knife-edge HEPA Filters provide fine particulate control to meet the requirements of today’s high technology cleanrooms and clean areas. Offering configuration and performance flexibility, the Pharmaseal filter will provide the highest level of protection for product processes and personnel. Standard gel seal filters contain polyurethane gel for knife edge seal.
Read MoreQuick View
