How to determine the size of the clean room air shower accordingly?
Users are curious to know how to determine the dimensions of air shower, so as not to make the air shower too large, waste the cost, make it too small. And affect production efficiency. So how do you determine the right size? Here are a few tips to help you figure it out:
1.Take example of single person double blow air showers, 1300 wide * 1000 deep * 2180 height outside size, Reserved air shower installation size is larger than this outside size. But can not be too large, because too big air shower after installation is not easy to trim.
2.If the walls of the workshop are solid cement walls, then the walls on both sides must be horizontal and vertical. And can be set aside for a size larger than 5 mm on each side, i.e. 1210 wide * 1000 deep * 2190 High. The installation personnel of air shower can be slightly used after installation and debugging can be a dozen of glass glue.
3. If the walls around the workshop for Color Steel, can refer to the actual wall of the size of the air showers. But the air showers outside the box had better be right angle. So not only the cost will be lower and trim edge will be more beautiful.
4. The air showers installation site will also be installed 380V three-phase four-wire power supply in place. And the power supply is greater than the air shower consumption.
5.The ground surface of the air showers has reached the basic level. And the tolerance of the ground level is ±3 mm.
